Óptica Aplicada - Fotónica

 
Utilice las fichas para mostrar el tipo de producto (Experimentos, Sets, Productos o Lit./Softw.).
 

Pag. 2 de 4

  <<  Regresar    1  2  3  4    Siguiente pag  >>

SOPORTE PARA LASER COAXIAL

Function and Applications

Holder with three-point bearing for laser tubes.

 
Detalles

Num.Producto: 08705-00

PIE MAGNETICO P. PLACA ELEMENTAL

Function and Applications

Due to internal three-point guide way, stable and highly accurate work holding device for optical components with round stems (d = 10...13 mm) on the optical base plate.

 
Detalles

Num.Producto: 08710-00

ANILLO DE AJUSTE D18xD10x7

Function and Applications

For placing and clamping on round stem optical components, to place them with afixed height in magnetic feet.

 
Detalles

Num.Producto: 08710-01

SOPORTE AJUSTADOR 35 X 35 MM

Function and Applications

For holding optical components (e.g. front surface mirrors).

 
Detalles

Num.Producto: 08711-00

ESPEJO SUPERFICIE 30 X 30 CM

Function and Applications

Can be used in adjustment holder (08711.00) for experiments with the optical base plate.

Equipment and technical data

  • High-quality front-surface plane mirror with SiO2-protective coat.
  • On aluminium holder with protective edge.
  • Mirror area (mm): 30 × ...
 
Detalles

Num.Producto: 08711-01

Plane mirror HR>99%, mounted

 
Detalles

Num.Producto: 08711-02

Concave mirror OC; r = 1.4 m, T = 1.7%

 
Detalles

Num.Producto: 08711-03

ESPEJO SUPERFICIE,d=80mm,SOP.

Function and Applications

High-quality front-surface plane mirror with SiO2-protective coat for experiments with the optical base plate.

Equipment and technical data

  • On holder with round stem l = 76 mm.
  • Rear adjustment screws for adjusting inclination of the mirror in x,y-direction. ...
 
Detalles

Num.Producto: 08712-00

AJUSTADOR XY

Function and Applications

For holding and fine positioning optical components for extending beams (microscope objectives) and spatial filtering (pinhole/aperture plate).

 
Detalles

Num.Producto: 08714-00

ANILLO ADAPTADOR

Function and Applications

For holding microscope objectives (e.g. objective 25 ×,62470.00) in adjustment direction x,y (08714.00).

Equipment and technica data

With internal thread for holding microscope objectives.

 
Detalles

Num.Producto: 08714-01

PLAC.INTERFEROMET.C.GUIA D.PREC.

Function and Applications

For precise and reproducible linear shift of optical components e.g. in interferometer set ups.

Equipment and technical data

  • Suppression of tilting effects due to traverse construction.
  • Wavelength adjustment through lever device with
...
 
Detalles

Num.Producto: 08715-00

CARRIL GIRATORIO C.ESCALA ANGULAR

Function and Applications

For reproducible angle adjustment of optical components about a freely positionable pivot.

 
Detalles

Num.Producto: 08717-00

SOPORTE PARA DIAFRAGMA

Function and Applications

For clamping and holding glass plates, beam splitters, etc.

Equipment and technical data

  • Rubber-covered clamping jaws with knurled screws 
  • With two round unscrewable stems l = 50 mm and l = 68 mm and d = 10 mm.
...
 
Detalles

Num.Producto: 08719-00

PORTALENTE C. PLACA ELEMENTAL

Function and Applications

For holding of framed lenses.

Equipment and technical data

  • With round stem (d = 10 mm, l = 35 mm).
 
Detalles

Num.Producto: 08723-00

PORTADIAFRAGMA C. PLACA ELEMENTAL

Design as 08040.00 however with shortstem l = 35 mm.
 
Detalles

Num.Producto: 08724-00

Pag. 2 de 4

  <<  Regresar    1  2  3  4    Siguiente pag  >>

X-ray expert unit

Este producto es un mundo primero

PHYWE presenta la nueva unidad de rayos X: tecnología innovadora, máxima seguridad y comodidad.

Contacto PHYWE

PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D-37079 Göttingen

T. +49 (0) 551 604-0
F. +49 (0) 551 604-107
Línea directa de servicio técnico
+49 (0) 551 604-196
service@phywe.com